CBDomain.com Australia's #1 Radio Hobby Forum

Author Topic: wiring Leson Mike to super puma  (Read 7230 times)

0 Members and 1 Guest are viewing this topic.

Offline _Keith_

  • Intermod
  • *
  • Join Date: Jun 2007
  • Posts: 4
  • Karma: +0/-0
Re: wiring Leson Mike to super puma
« Reply #7 on: June 03, 2007, 09:47:03 PM »
Hi bunter

   Leson Desk TW 232.

  As I said earlier I'm no Electronics geek so probably should have given the wiring on the mike already attached to Puma

                                                                   which is            Braid          Black


                                                                                          Yellow       Red     Looking at plug front on groove at top

 I know probably should have given these details before.     Keith

Offline BuNtEr

  • Lord of War
  • Administrator
  • *****
  • Join Date: Mar 2006
  • Posts: 990
  • Karma: +8/-2
  • Gender: Male
  • Lord of War
Re: wiring Leson Mike to super puma
« Reply #6 on: June 03, 2007, 09:28:48 PM »
is it a leson desk mic or a leson hand mic

leson tw232 ?

Some radio's have the same pin outs and some don't

i am sure yellow and white are audio and the others are for tx just need to chop and change till you get the tx working then its as simple as swapping the yellow and white

easy way to see what pins on the mic is tx is short 2 pins  at a time till u see it key up on tx and that will tell you that much.
What can i say but just that

Offline _Keith_

  • Intermod
  • *
  • Join Date: Jun 2007
  • Posts: 4
  • Karma: +0/-0
Re: wiring Leson Mike to super puma
« Reply #5 on: June 03, 2007, 09:10:44 PM »
Hi bunter
   The Leson is wired this way now        White/braid       Yellow       
                                                                 
                                                               
                                                                                               (Red not used.)                                     
                                                       
                                                      No Wire             Black          This is looking at 4 pin plug front on with groove at top


I dont know anything about electonics but can do basic stuff like rewiring a mike.

Not sure if this helps        Keith
 

Offline BuNtEr

  • Lord of War
  • Administrator
  • *****
  • Join Date: Mar 2006
  • Posts: 990
  • Karma: +8/-2
  • Gender: Male
  • Lord of War
Re: wiring Leson Mike to super puma
« Reply #4 on: June 03, 2007, 08:53:17 PM »
no red is used all 5 wires are red and braid or black should be TX ptt white and yellow should be your audio from the mic
What can i say but just that

Offline _Keith_

  • Intermod
  • *
  • Join Date: Jun 2007
  • Posts: 4
  • Karma: +0/-0
Re: wiring Leson Mike to super puma
« Reply #3 on: June 03, 2007, 08:26:11 PM »
Thanks bunter,  I'm sure your right about BRAID and BLACK together and I think RED is left unattached but I don't know in what order the other White - Yellow follow the BRAID/BLACK on the four pin plug.  Thanks anyway  Keith

Offline BuNtEr

  • Lord of War
  • Administrator
  • *****
  • Join Date: Mar 2006
  • Posts: 990
  • Karma: +8/-2
  • Gender: Male
  • Lord of War
Re: wiring Leson Mike to super puma
« Reply #2 on: June 03, 2007, 07:24:10 PM »
I think the puma is a 4 pin, and i know the leson is a 5 wire mic

 best way to do it is use a multi meter to fig out what 2 wires are for ptt but im sure but not 100% sure that the braid and the black wire are to be solded to the same pin, i hope that gives you a better idea.
What can i say but just that

Offline _Keith_

  • Intermod
  • *
  • Join Date: Jun 2007
  • Posts: 4
  • Karma: +0/-0
wiring Leson Mike to super puma
« Reply #1 on: June 03, 2007, 06:30:44 PM »
Hi All
  Would like wiring diagram for Leson power mike for a Super Puma, can anyone help.

Thanks  Keith