CBDomain.com Australia's #1 Radio Hobby Forum

Author Topic: Uniden UH-011 SCAN MOD? and ALIGNMENT INFO  (Read 5088 times)

0 Members and 1 Guest are viewing this topic.

Offline treestump

  • Intermod
  • *
  • Join Date: Apr 2006
  • Posts: 1
  • Karma: +1/-0
  • Dont Call me SUE
Uniden UH-011 SCAN MOD? and ALIGNMENT INFO
« Reply #1 on: April 29, 2006, 07:12:29 PM »
Hi all.

I have the Uniden UH-011 Alignment infomation here for anyone who needs
it, but what I am asking for is does anyone have the mod to make them
scan?


I have seen inside of one that has been modded and all it was, was a
wire from linked from a pin on a chip inside the radio to the T/SQL
button on the front.


You then only had to push that button in on the front to make it scan
at about 2 channels per second. Pushing the button again made it stop I
think.


Please if anyone has info on this mod I would really appreciate it, I
have not found it anywhere on the internet.


Here is the alignment info for anyone who needs it.
Alignment information for Uniden UH-011
  Contact author:
Rod, VK4XTL
  Print


UH011(Early Model)
PLL UC1368A
DRV = 2SC2131
PA = 2SC3021


Alignment
Frequency - L302
VR101 - AF Gain
VR102 - Squelch
VR251 - Deviation
VR301 - Modulation Balance


---------------------------------------------------------------------------?-----


UH011
(PD-658AA)
PLL UC1368A
PA = 2SC3021
DRV = 2SC2131
Alignment
Frequency - (Small Inductor can in PLL)
RT103 - AF Gain
RT102 - Squelch
RT201 - Deviation
?? - Modulation Bal
RT101-.S.Meter
RT203-.S.Meter
RT203-ALC

Thank you to anyone who can help